• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to decay or rust as aluminum and timber.

It is essential to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. However when you have double glazed window repairs-pane windows that are secured by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you're planning to try to remove the glass panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor, where they could be trampled.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the distance between the window and the door is substantial, you may want to use a security screen that also has windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to open the windows to reach the frame. With a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they remain in place.

If you aren't able to move the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it could also be due to the handle mechanism getting worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. You'll first need to close the window and do an experiment fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue is, the old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and could reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe situations, you may have to replace the window repair near me.

Moldy sills and rotten ones are also signs of water leakage. This mold thrives in damp environments and can quickly spread across the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. It is also possible to be corrected by an upvc window repair near me window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze, it may be the hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to change the hinges on a window but it's much simpler if you have someone to help hold the frame.

Verify that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or by a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be pleased to offer you suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. First, the hinges due to wear and tear can become misaligned, this will cause an opening to appear between the sash and the frame. If they are beyond repair, it could be necessary to get them re-aligned. The interlock may also become disaligned. It is located on the hinge's side and might require to be cleaned. In some cases, it may be necessary to replace them.

The second most frequent reason for draughts are the window seals, these are prone to wear or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and lessen the risk of draughts.

Another, and most effective ways to cut down on drafts is to use an draught excluder. These are usually fabric tubes filled with some kind of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a life span and eventually, they will reach the point when it's more cost-effective to replace them rather than repair them. If you encounter any issues with your window repair near me made of upvc it is recommended to speak with an expert immediately.